CNC vertical lathe operation experience summary

CNC vertical lathe operation experience summary

In the mold factory, CNC Vertical Lathes CNC machining centers are mainly used for the machining of key parts of molds such as die nuts, inserts and copper males, etc. The quality of die nuts and inserts is directly related to the quality of molded parts. The quality of mold nuts and inserts directly determines the quality of the molding part of the mold. And the quality of copper male processing directly constraints on the EDM processing impact. For CNC processing quality assurance, the key lies in the preparation before processing, in terms of this post, in addition to having rich processing experience and mold knowledge, in the work should also pay attention to good communication, especially with the production team, colleagues.
CNC machining process
1)Reading drawings and program sheets
2)Transfer the corresponding program to the machine tool
3)Check the program header, cutting parameters, etc.
4) CNC vertical turning | CNC Milling Machine | CNC special machine workpiece on the process of machining size, margin determination
5)Reasonable clamping of the workpiece
(6) The ****** alignment of the workpiece
(7) ****** establishment of workpiece coordinates
(8) Reasonable tool, cutting parameters selection
(9) Reasonable clamping of tools
(10) Safe way of test cutting
(11) Observation of the machining process
12)Adjustment of cutting parameters
(13) CNC vertical lathe | milling machine | CNC special machine machining process problems with the appropriate personnel in a timely manner feedback
(14) After processing the end of the workpiece quality inspection

Precautions before machining
1) CNC lathe | milling machine | CNC machine for the new mold, machining diagrams to meet the requirements, and clear data; new mold machining diagrams should have the signature of the supervisor, machining diagrams of the columns have been filled.
(2) The workpiece has the qualified mark of the quality department.
3)After receiving the program list, check whether the workpiece datum is consistent with the drawing datum.
4)Read each requirement on the program sheet to confirm whether the program is consistent with the requirements of the drawing, if there is any problem, we must solve the problem together with the programmer and the production team.
5)According to the material of the workpiece and its size, judge the reasonableness of the programmer to open the rough or light knife program selection of Cnc Tools, if you find that the tool application is unreasonable, you should immediately notify the programmer to make the appropriate changes, in order to improve the machining efficiency and precision of the workpiece processing.